The Rosemount™ 3417 4+4 Dual‑Configuration Gas Ultrasonic Flow Meter delivers high‑integrity custody transfer measurement with two independent four‑path meters in a single body.
This fully redundant design enables continuous validation, early detection of flow disturbances, and immediate identification of measurement bias—helping reduce uncertainty, protect revenue, and ensure reliable, audit‑ready performance in high‑value natural gas applications.​
Rosemount 3417 Gas Ultrasonic Flow Meter
Rosemount™ 3417 4+4 Dual-Configuration Gas Ultrasonic Flow Meter

Specs

Line Sizes
DN200 to DN900 (8-in to 36-in) with British Gas (BG) orientation
Fluid Type
Gas
Accuracy
±0.1% of reading relative over entire flow calibration range
Repeatability
±0.05% of reading for 5 to 100 ft/s (1.5 to 30.5 m/s)
Velocity
Rated up to 100 ft/s (30 m/s) with over-range performance exceeding 125 ft/s (38 m/s) on some sizes
Operating Temperature Range
–58°F to +212°F (–50°C to +125°C)​
Operating Pressure Range
0 to 4,000 psig (276 barg)​
Materials
Carbon steel and stainless steel
Safety and Environmental Compliance​
UL / cUL ​
Custody Transfer Compliance
AGA 9​

Features

  • Achieve continuous measurement validation with two fully independent four-path custody transfer meters operating in a single flow body.
  • Reduce custody transfer risk by identifying measurement deviation through real-time comparison of independent meter outputs.
  • Simplify installation with a dual-meter configuration that eliminates the need for a second meter run and additional piping.
  • Increase operational flexibility with >100:1 rangeability to support wide flow conditions with fewer meter runs.
  • Maintain uptime with transducers that can be serviced under pressure without interrupting flow or requiring special tools.
  • Accelerate troubleshooting with Smart Meter Verification that converts complex diagnostics into clear, actionable insights.
  • Automate compliance with embedded AGA 8 and AGA 10/GERG-2008 calculations to support consistent, audit-ready custody transfer measurement.
  • Enable advanced system integration with high-speed electronics providing Ethernet connectivity, diagnostics, and expanded I/O.

Our website uses cookies. By continuing to browse our site you are agreeing to our Cookie Policy.

Back To Top