Yarway Narvik HT- Templow Probe Style, High Temperature

The TempLowHT utilizes the fundamental design concepts of the standard Templow, designed for temperatures up to 621°C.

The TempLowHT is designed to eliminate sliding trim parts in the hot zone

Specs

Critical Service

Steam Condition

Flow Characteristics

Special Characterization, Modified Equal Percentage, Linear, Equal percentage

Material

Alloy

Operating Temperature

High Temperature

Pressure Class

PN, ASME

Shutoff Class

Class V (FCI 70-2)

Valve Size

NPS 1-1/2 / DN 40, NPS 1 / DN 25, NPS 2 / DN 50, NPS 3 / DN 80, NPS 6 / DN 150, NPS 4 / DN 100

Valve Size Standard

NPS, DN

Valve Type

Angle Valve

Installation in straight, vertical or horizontal pipe.
Minimal headroom is required for mounting
Standard connections to ASME B16.5
Rapid evaporation of water is achieved to minimize the accumulation of water in the line.
Control within 10°F (6°C) of saturation is possible.
Water turndown capacity of 50:1 (typically) or higher is available.
Forged body with, stainless steel internals eliminates corrosion and vibration issues.
Inconel 718 nozzles minimize wear.
Replaceable Stellite® or 17% Cr seat for long life tight shut-off.
Long trim life. Pressure drop is taken across the nozzles rather than the seating surfaces.
Injection probe unscrews from body for easy capacity changes without changing stem/disc or seat.
Actual performance depends on the application and in many instances may exceed the design characteristics above.