DeltaV™ LS 24 VDC Power CHARM

A LS (Logic Solver) Power Characterization Module (CHARM) for 24 VDC Power outputs.

Specs

Device Type

24 VDC Power output

Detection Level for On

>10 VDC

Detection Level for Off

<5 VDC

Isolation

Status read back circuitry is optically isolated and factory tested to 1000 VDC. Output power has no isolation from the injection point.

Field Circuit Protection

2 Amp fuse located in Fused Injected Power Terminal Block, Field wiring disconnect

CHARM Power Req.

8 mA max @ 24 VDC

Injected Power Req.

1.01 Amps max @ 24 VDC

CHARM Heat Dissipation

0.32 W

Eliminate marshalling and add I/O anywhere in the plant without affecting control room cabinets
No marshalling cabinet or cross-wiring, fewer wires, much less work and fewer contact points for potential failures
No marshalling cabinet or cross-wiring, fewer wires, much less work and fewer contact points for potential failures