The Flexim FLUXUS G70X SIL flow meter is an ideal choice when it comes to maintaining accurate measurements in harsh conditions - e.g.
during the flow measurement of highly pressurised, aggressive, toxic or highly explosive gaseous media. The SIL 2 certification of the G70X SIL non-intrusive flow meter includes the entire measuring system - the measuring transmitters and transducers.
Flexim FLUXUS G70X SIL Functional Safety

Specs

Accuracy
Measurement uncertainty of the measuring system (volumetric flow rate): ±0.5 % of reading ±0,01 m/s (±0.03 ft/s)
Measurement uncertainty at the measuring point (volumetric flow rate): ±1…3 % of reading ±0,01 m/s (±0.03 ft/s)
Certifications/Approvals
FM Class I /Div 2
ATEX/IECEx Zone 2
NEPSI
PESO
KOSHA
Communication Protocol
RS232
Flow Channels
up to 2
Fluid type
All gases
Input
-
Output
4-20mA active/passive
binary
Pipe size
7 to 1600 mm (0.28 to 63 inch)
Power supply
100-230VAC
Pressure range
1barg (15 psig) to unlimited
Range
Flow Velocity Range: 0,01…35 m/s (0.03 to 115 ft/s), depending on pipe diameter
Repeatability
0.15 % of reading ±0,01 m/s (±0.03 ft/s)
Temperature range (media)
-40 to +240°C (-40 to +464°F)

Features

  • Simple retrofitting during ongoing operation.
    Ideal for a subsequent increase in safety.
    Ideal for maintaining the protective function should an inline measurement fail.
  • Comprehensive certification.
    Transducers, clamp device and electronics are part of the FMEDA.
  • Extremely wide range of applications.
    Transducers and measuring transmitters for the flow measurement of gases.
  • Straightforward retesting.
    Easy functional tests in no time at all.
    Convincing self-diagnosis functions.
  • Transparent evaluations.
    Publication of FMEDA report.
    Full information on certification procedures and scope.

Our website uses cookies. By continuing to browse our site you are agreeing to our Cookie Policy.

Back To Top