Body
Conforming to AWWA C504 wall thickness, the BALLCENTRIC valve body casting is in ASTM A126 CL B cast iron using high pressure molding techniques. Flanged or mechanical joint ends are available. Other materials are available upon request. Flange diameter, thickness and drilling conform to ANSI B16.1 Class 125. Mechanical joints conform to AWWA C111 (ANSI A21.11).
Seat
The BALLCENTRIC valve incorporates as standard, on 3” and larger, a 1/8” thick welded 99% nickel seat for corrosion and erosion resistance specifically profiled for low torque and extended seat life.
Plug
Supported on integral trunnions, the plug is totally encapsulated with an elastomer that is molded to the casting providing tight shut off even under vacuum conditions. High integrity corrosion-free sealing is achieved by a variety of abrasion resistant elastomers which protect the plug right up to the trunnions. When assembled, the light compression of the elastomers onto PTFE thrust washers, prevents entry of abrasive materials into the bearings.