Back To Top
Spartan Control’s PowerVue™ Motor Control Centres (MCC) are designed to accelerate project timelines while reducing installation and commissioning costs associated with low voltage MCC projects.
Our innovative assembly process provides flexibility to project managers, engineers, and electricians to ensure you get what you want when you want it.
PowerVue™ Motor Control Centres (MCC)

Specs

Environment
Indoor
Altitude
1,000 metres
Ambient Temperature
-20°C to 40°C
Temperature Rise
60°C
Enclosure Rating
NEMA 1, NEMA 1A, NEMA 12
Exterior Finish
RAL 7035
Interior Finish
Galvanized
Access
Front, rear, back-to-back
Cable Entry
Top, bottom
Standards
CSA C22.2 #254, UL845
Voltage
208, 480, 600
System
3P3W, 3P4W
Frequency
60Hz, 50Hz
Grounding
HRG, solid
Amperage
400A, 500A, 800A, 1200A, 1600A, 2000A, 2500A, 3000A, 4000A, 5000A
Phase Bus
Copper, tinned copper
Ground Bus
Copper, tinned copper
Insulation
Fully insulated
Bracing
25kA, 42kA, 65kA, 85kA, 100kA
Incoming
MLO, switch, breaker, bus direct
Protection
Ground fault, SPD, Relay, arc quench
Metering
PQM, delta, wye
Comm Protocols
CHARM I/O, ethernet I/P, modbus TCP, DeviceNET, profinet, profibus
Redundancy
PRP
Control Voltage
120V, 24V, other
Control Wiring
#14 TEW (STD), #12 TEW, other
Wiring Class
1B, 2C
Terminal Blocks
Pull apart
Type
Drawout, full drawout, fixed
Disconnect
Breakers, fusible switch
Contactors
Electrical held, mech latched
Overloads
Bi-metallic, electronic
VFDs
Yaskawa, other
Pilot Lights
22mm (STD), 30mm, P-T-T
Auxiliary Contacts
2-6
Functional Options
Shutters, bottom plates
Nameplates
Lamacoids
Mounting Base
Plinth
Transfer Switch
Automatic, manual
Control
PK controller
Marshalling
CHARMS I/O

Features

  • Reduced Start-up time | Spartan PowerVue™ can be equipped with built-in DeltaV™ to significantly reduce site installation and commissioning time.
  • Increased Safety | Protect personnel and equipment by reducing arc flash risk with optional integral arc quenching technology.
  • Easy Maintenance | Fully withdrawable options allow for a bucket to be changed in seconds without the use of any tools or manually disconnecting any cables.
  • Reduced Cost | Multiple mounting options for electrical devices can reduce the overall cost of an MCC.
  • Reduced Footprint | Compact withdrawable buckets can reduce the overall size of an MCC.
  • Easy Installation | Larger wireways and quick connection features facilitate easy installation for electricians and staff.