Charge Oil Flow Control

Furnace feed applications are challenging because of high temperatures and composition of the hydrocarbon. Measurement and control is important on a fired heater as the natural gas used in the furnace is a direct cost contributor to your bottom line. 

Spartan solutions in this application have been fine-tuned over many years to address these challenges. Specifically, the Fisher V500 control valve was designed with direct customer feedback to address harsh flows at high temperature. The Fisher Digital Valve Controller keeps the flow rate tightly controlled, while Rosemount Vortex flow meteres are resistant to clogging, are suited for high temperature and are immune to coating.

Additionally, Spartan’s solution allows you to fine tune the combustion process with O2 and CO measurements using analyzers from Rosemount Analytical. 

The Fisher V500 eccentric plug rotary control valve controls erosive, coking and other hard-t-handle fluids, providing either throttling or on-off operation.
Fisher
Fisher Large ET control valves are used for either throttling or on-off control of a wide variety of liquids and gasses.
Fisher® CV500 is a flanged or flangeless eccentric plug valve with reversible metal seat ring and splined shaft. The CV500 is available in NPS 3 through 12 (DN 80 through 300) , CL150/300/600 (PN 10 through PN 100).
Fisher EW series easy-e valves feature large internal cavities with expanded end connections and a variety of unbalanced and balanced plug designs.
The FIELDVUE DVC6200 is a digital valve controller capable of operating using 4-20 mA, HART, Fieldbus, or Profibus communication protocols. The basis of its operation is the conversion of a control signal into a pneumatic output controlling valve position.