Heater Fuel Gas Supply

Measurement and control is important on a fired heater as the natural gas used in the furnace is a direct cost contributor to your bottom line. Precise control of the fisher control valve by the digital valve controller ensures the correct amount of fuel is being delivered to the burner.  

The measurement of the fuel is performed by a Micro Motion coriolis flow meter, providing the most accurate direct mass flow measurement. 

Fisher
Fisher Large ET control valves are used for either throttling or on-off control of a wide variety of liquids and gasses.
Fisher
Fisher EZ valves (figure 1) are used for throttling or on-off control of a wide variety of liquids and gases. The single-port, globe-style body design offers quick-change trim and a post-guided, unbalanced valve plug.
The Vee-Ball valve combines globe valve ruggedness with the efficiency of a rotary valve. A shearing action between the V-notch ball and the ball seal promotes smooth, non-clogging operation. The unrestricted straight-through flow design provides high capacity for gas, steam, liquids, and fibrous slurries.
The FIELDVUE DVC6200 is a digital valve controller capable of operating using 4-20 mA, HART, Fieldbus, or Profibus communication protocols. The basis of its operation is the conversion of a control signal into a pneumatic output controlling valve position.
VCI Logo
VCI offers a complete line of ball valves including CSA approved valves, FM approves valves, Hygienic valves, cryogenic valves, and seam valves.
Coriolis products are commonly used for flow and density measurements in applications such as crude oil, pipeline custody transfer, truck loading/unloading, and more. Spartan Controls represents Micro Motion, which provides industry leading accuracy and reliability even in the toughest process conditions. Micro Motion meters are the highest performing coriolis flow and density measurement devices available today.