Combustion Safety Solutions

When natural gas is burned to create heat it also produces carbon dioxide, nitric oxide,nitrogen dioxide and sulphur dioxide, compounds which contribute to smog, acid rain and repertory. When there is insufficient natural gas combustion, volatile hydrocarbons are created. By controlling air to fuel ratios it is possible to lower emissions as well as lower fuel gas consumption. Effective management of energy, emissions and environmental performance are critical in reducing costs and meeting regulatory compliance requirements. 

Spartan's Performance Solutions provides industrial energy management consulting and pre-packaged application solutions to address the most challenging problems in the industry. We specialize in combustion management solutions for industrial boilers, including: packaged boilers, multi-fuel/biomass boilers, and Steam Generators (OTSG/HRSG). Our pre-packaged control solutions are designed to provide optimized combustion control and integrated safety systems (including Burner Management Systems (BMS) CSA B149.3 certification for forced draft burners >10MMBTU).

ACL-logo

The ACL CSC 400 Combustion Safety Control is a leading edge burner management system which provides burner ignition and flame fail for single or dual burner applications, as well as monitoring of three separate thermocouple inputs which can be utilized for temperature control in process applications such as tanks, line heaters, re-boilers or any other applications where accurate temperature monitoring and or control is required.

ACL-logo
The ACL CSC 200 Combustion Safety Control is a simple to use Burner Management System/Combustion Safety Controller that has an abundance of features with no programming requirements needed. The ACL CSC200 provides burner ignition and flame fail, shutdown monitoring of multiple inputs, as well as monitoring of two separate thermocouple inputs which can be utilized for temperature control in process applications such as tanks, line-heaters, re-boilers or any other application where accurate temperature monitoring or control is required.
ACL-logo
The ACL 5100 Combustion Safety Controller is designed to ignite and prove a continuous pilot and monitor and annunciate shutdowns for all types of natural gas fired heaters and industrial sized burner applications. The ACL 5100 is a key component in a complete system that provides safe, reliable, high efficiency, low NoX solutions which meets and exceeds CSA B149.3-10 and NFPA Standards.
ACL-logo
The ACL 5500 Combustion Safety Controller is designed to ignite and prove a continuous pilot and monitor and annunciate multiple heater shutdowns for all types of natural gas fired heaters and industrial sized burner applications. The ACL 5500 is a key component in a complete system that provides safe, reliable, high efficiency, low NoX solutions which meets and exceeds CSA B149.3-10 and NFPA Standards.
ACL-logo
The ACL TC200 Electronic Temperature Controller is designed for accurate temperature monitoring, calibrating and control of industrial heating applications. The two independent 4 to 20 mA analog signals combine local temperature control, and remote temperature monitoring as well as two digital outputs for shutdown and temperature control.

Ask a question

*
*
*
*
Close x

Request a quote

*
*
*
*
*
Close x